Description
Buffalo Patch 411 B for SiC Crucible- 50 pounds | |||||||
BUFFALO PATCH® 411B is an all-purpose Silicon Carbide base cement recommended for attaching crucible pouring spouts, general crucible repair, and maintenance of crucibles and crucible furnaces. It is also recommended as a mortar for laying SiC brick and shapes and as a "Brush On" coating refractory. | |||||||
Maximum grain size: 16 mesh | |||||||
Available in 10 lb Buckets or by the 50 lb Bag. | |||||||
MIXING INSTRUCTIONS This standard provides the mixing instructions for Buffalo Patch Mortars; 411B. STORAGE EQUIPMENT MIXING |
|||||||
|
|||||||
Mix until the mortar is uniform. Total mixing time should not exceed five minutes. For best results, allow mixed mortar to age for four hours prior to using, then re-mix until the mortar is uniform. Total mixing time should not exceed three minutes. CAUTION The following will adversely affect the density, strength and setting properties of Buffalo Patch Mortars: • Dirty and/or hot water • Cement contamination • Excessive water • Dirty mixing equipment Curing Time: Buffalo Patch contains a sodium silicate binder. As a result, curing time and rate are not as critical as some other products. Normal curing procedure should allow for initial warm room temperature drying of 24 hours, then gradual increased temperature. Cold temperatures will retard the setting process. Never heat at a rate that will produce steam. Any non-field technical advice furnished by Seller with reference to the use of its Products is given gratis, and Seller assumes no obligation or liability for the advice given or the results obtained. All such advice is given and accepted at Buyer's sole risk. |
Reviews
There are no reviews yet.